Job Description

Overview

The Welder/Fabricator position involves performing MIG and TIG welding and fabrication of cabinet components for custom environmental test chambers, as well as assisting in their assembly.

Responsibilities

  • Review and interpret engineering drawings, prints, weld symbols, work orders, and work instructions.
  • Accurately measure, mark, cut, drill, grind, fit, and prepare materials for welding and fabrication.
  • Set up MIG and TIG welding equipment according to material type, thickness, weld requirements, and established procedures.
  • Perform quality MIG and TIG welds on steel, stainless steel, and other materials as required.
  • Follow specified weld locations, sizes, sequences, and requirements shown on engineering drawings and work instructions.
  • Adjust welding techniques, settings, travel speed, and heat input to achieve proper weld quality and minimize distortion.
  • Grind, blend, clean, and finish welds as required to meet appearance and dimensional requirements.
  • Inspect completed welds and components for proper size, penetration, appearance, alignment, and defects.
  • Recognize discrepancies between drawings, materials, and actual components and communicate concerns to the Team Lead or appropriate department.
  • Assist with more complex welding and fabrication projects.
  • Perform additional duties as directed.

Requirements

  • High school diploma or GED.
  • Two or more years of welding, fabrication, manufacturing, or related experience.
  • Demonstrated experience with MIG and TIG welding.
  • Experience reading and following engineering drawings, weld symbols, and work instructions.
  • Experience using welding equipment, grinders, hand tools, power tools, and measuring equipment.

Additional Information

  • 1st Shift

How this job compares in Holland, MI

Pay in context

At roughly $29/hr, this posting sits about 12% above the $26/hr median for welding jobs across Michigan — toward the top of a $25–$33/hr middle band drawn from 28 postings with published pay. Put another way, it pays more than about 64% of the comparable postings we have wage data for. Pay that far above local median usually comes attached to something: a harder cert requirement, travel, night shift, or overtime that isn't really optional. Worth establishing which before you accept.

The local market in Holland, MI

Holland, MI currently has 3 other active welding openings besides this one, spread across 3 employers. 1 of them was added in the last week. Across Michigan as a whole we're tracking 55 other active welding openings from 46 employers. That's enough local activity to be worth comparing two or three offers before committing. Browse every welding job in Holland, or widen the search to Michigan.

The most active employers in Michigan at the moment, by number of open welding reqs, are Woodward, Inc. (3), Welding Shop in Detroit, MI (3), and Terex (2). Volume like that usually means either a genuine expansion or a staffing agency working several client sites — worth knowing which before you apply.

What you'll be running

This posting calls for MIG and TIG work. MIG (GMAW) feeds a continuous wire electrode through a shielding-gas nozzle. It lays down metal fast and is forgiving on clean material, which is why it dominates production and light fabrication work. TIG (GTAW) uses a non-consumable tungsten electrode with filler added by hand, giving the operator the most control of any process. It is slow, demanding, and the standard for stainless, aluminum, and anything where the bead has to look as good as it holds.

Similar openings near Holland, MI

  • Welder - III — M.W. Watermark® · Holland, MI
  • Fabricator — Hitachi Global · Holland, MI
  • Welder — Russells Technical Products · Holland, MI
  • Welder - Level 3 — American Rheinmetall · Plymouth, MI
  • Welder — Manpower · Crystal Falls, MI · $21–$25/hr
  • Welder / Fabricator — Rohrscheib Sons Caissons, Inc · New Hudson, MI · $19–$35/hr

Pay figures are medians computed from live postings in the Welding Pros index, not from survey data, and they move as employers post. Welder figures were last recalculated when this page was built.